PowerLift
by ReechCraft
24
Once the Walk-Around Inspection check is complete, perform a function check of
all systems in an area free of overhead and ground level obstructions.
IF THE MACHINE DOES NOT OPERATE PROPERLY, SHUT OFF AND REMOVE POWER
FROM THE MACHINE IMMEDIATELY! REPORT THE PROBLEM TO THE PROPER
MAINTENANCE PERSONNEL AND DO NOT OPERATE THE MACHINE UNTIL IT HAS
BEEN DEEMED SAFE FOR OPERATION.
Function Check Items
1. Overload Clutch - Check to be sure the Overload Clutch is functioning
properly by briefly running the drill motor in the reverse direction
(counterclockwise). You should hear and audible buzzing sound.
NOTE:
Be sure to maintain a firm grip on the drill.
2. Outrigger Interlock - Check to be sure the Outrigger Interlock is
functioning properly by briefly running the drill motor in the forward
position (clockwise) with the outriggers removed. The platform should
not disengage from is fully-lowered position and you should hear an
audible “buzzing” sound coming from the overload clutch slipping.
NOTE:
Be sure to maintain a firm grip on the drill.
3. Mast Connectors - Check to be sure the components of the Mast
Connectors are present, undamaged, clear of debris and in good
working condition. (See Figure 2-7)
NOTE:
Be sure the top mast Termination Plate is present, undamaged and
securely attached to the mast section.
secti
On
2
pREpARATION & INSpECTION
2.4
Function Check
DANGER
NOTICE
CAUTION
WARNING
