PowerLift
by ReechCraft
50
General
The following information is provided to assist you in the use and application
of service and maintenance procedures contained in this chapter.
NOTE:
Refer to Service and Parts Manual for additional information.
WHEN AN ABNORMAL CONDITION IS NOTED AND PROCEDURES CONTAINED
WITHIN THIS MANUAL DO NOT SPECIFICALLY RELATE TO THE NOTED
IRREGULARITY, USE OF THE MACHINE SHOULD BE STOPPED AND A
QUALIFIED MECHANIC WITH PROPER KNOWLEGE SHOULD CORRECT THE
IRREGULARITY BEFORE WORK IS RESUMED.
Safety and Workmanship
Your safety, and that of others, is the first consideration when engaging in the
maintenance of equipment. Always be conscious of moving components and
pinch points. Do not allow heavy objects to rest in an unstable position. When
raising a portion of the machine, ensure that adequate support is provided.
Cleanliness
The single most important item in preserving the long service life of a machine
is to keep foreign materials out of the vital components. Reasonable precautions
have been taken to safeguard against this. However, these areas must be
maintained on a scheduled basis in order to preserve proper function of the
machine.
Component Disassembly and Reassembly
When disassembling or reassembling a component, complete the procedural
steps in sequence. Do not partially disassemble or reassemble one part and
then start another. Always recheck your work to assure that nothing has been
overlooked. Do not make any adjustments, other than those recommended,
without obtaining proper approval.
6.4
Servicing & Maintenance Guidelines
DANGER
NOTICE
CAUTION
WARNING
secti
On
6
SERVICE & MAINTENANCE
