Red Hat GFS 5.2.1 - Скачать руководство пользователя страница 50

Страница: 50 / 192

Chapter 5. Using the Pool Volume Manager

Complete Display

pool_info -v [

PoolName

]

PoolName

Specifies the pool name(s) for which to display information. If no pool names are specified, all

active pools are displayed.

5.12.2. Examples

This example displays basic information about all activated pools:

pool_info -i

This example displays complete information about all activated pools:

pool_info -v

This example displays complete information about

pool0

pool_info -v pool0

5.13. Using Pool Volume Statistics

The

pool_info

command can be used to display pool read-write information and to clear statistics

from pools.
Using the

pool_info

command with the

-s

option displays the number of reads and writes for the

named pool(s) since the last time the pool was activated or statistics were cleared.
Using the

pool_info

command with the

-c

option clears statistics from the named pools.

5.13.1. Usage

Display the Number of Reads and Writes

pool_info -s [

PoolName

]

PoolName

Specifies the pool name for which to display information. If no pool names are specified, all

active pools are displayed.

Clear Statistics

pool_info -c [

PoolName

]

PoolName

Specifies the pool name(s) from which statistics are cleared. If no pool names are specified,

statistics are cleared from all active pools.

Содержание GFS 5.2.1 -

































































































































































































Результаты поиска

Содержание GFS 5.2.1 -

Отзывы:

Похожие инструкции для GFS 5.2.1 -

Бренды по названию

Популярные бренды

Red Hat GFS 5.2.1 -, Руководство администратора

Результаты поиска

Содержание GFS 5.2.1 -

Отзывы:

Похожие инструкции для GFS 5.2.1 -

Бренды по названию

Популярные бренды