Red Hat GFS 5.2.1 - Скачать руководство пользователя страница 44

Страница: 44 / 192

Chapter 5. Using the Pool Volume Manager

5.5.1. Usage

pool_tool -c

ConfigFile

Specifies the file that defines the pool.

5.5.2. Example

In this example, the

pool0.cfg

file describes the new pool,

pool0

, created by the command.

pool_tool -c pool0.cfg

5.5.3. Comments

Multiple pools can be created with one

pool_tool

command by listing multiple pool configuration

files on the command line.
If no flag is specified in the

pool_tool

command, the function defaults to creating a pool (

-c

), with

the configuration file specified after the command.

5.6. Activating/Deactivating a Pool Volume

The

pool_assemble

command activates or deactivates pools on a node.

Note

The

pool_assemble

command must be run on every node that accesses shared pools; also, it must

be run each time a node reboots.

The

pool_assemble

command only activates pools from devices visible to the node (those listed in

/proc/partitions/

). Disk labels created by the

pool_tool

command are scanned to determine

which pools exist and, as a result, should be activated. The

pool_assemble

command also creates

device nodes in the

/dev/pool/

directory for devices it has activated.

5.6.1. Usage

Activating a Pool Volume

pool_assemble -a [

PoolName

]

PoolName

Specifies the pool to activate. More than one name can be listed. If no pool names are specified,

all pools visible to the system are activated.

Deactivating a Pool Volume

pool_assemble -r [

PoolName

]

Содержание GFS 5.2.1 -

































































































































































































Результаты поиска

Содержание GFS 5.2.1 -

Отзывы:

Похожие инструкции для GFS 5.2.1 -

Бренды по названию

Популярные бренды

Red Hat GFS 5.2.1 -, Руководство администратора

Результаты поиска

Содержание GFS 5.2.1 -

Отзывы:

Похожие инструкции для GFS 5.2.1 -

Бренды по названию

Популярные бренды