Red Hat GFS 5.2.1 - Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 192

background image

Chapter 1.

GFS Overview

GFS is a cluster file system that provides data sharing among Linux-based computers. GFS provides

a single, consistent view of the file system name space across all nodes in a cluster. It allows appli-

cations to install and run without much knowledge of the underlying storage infrastructure. GFS is

fully compliant with the IEEE POSIX interface, allowing applications to perform file operations as if

they were running on a local file system. Also, GFS provides features that are typically required in

enterprise environments, such as quotas, multiple journals, and multipath support.
GFS provides a versatile method of networking your storage according to the performance, scalability,

and economic needs of your storage environment.
This chapter provides some very basic, abbreviated information as background to help you understand

GFS. It contains the following sections:

•

Section 1.1

New and Changed Features

•

Section 1.2

Performance, Scalability, and Economy

•

Section 1.3

GFS Functions

•

Section 1.4

GFS Software Subsystems

•

Section 1.5

Before Configuring GFS

1.1. New and Changed Features

New for this release is GNBD (Global Network Block Device) multipath. GNBD multipath config-

uration of multiple GNBD server nodes (nodes that export GNBDs to GFS nodes) with redundant

paths between the GNBD server nodes and storage devices. The GNBD servers, in turn, present mul-

tiple storage paths to GFS nodes via redundant GNBDs. With GNBD multipath, if a GNBD server

node becomes unavailable, another GNBD server node can provide GFS nodes with access to storage

devices.
With GNBD multipath, you need to take into account additional factors — one being that Linux page

caching needs to be disabled on GNBD servers in a GNBD multipath configuration. For information

about CCS files with GNBD multipath, refer to Section 6.4

GNBD Multipath Considerations

. For

information about using GNBD with GNBD multipath, refer to Section 11.1

Considerations for Using

GNBD Multipath

.

For upgrade instructions, refer to Appendix A

Upgrading GFS

.

1.2. Performance, Scalability, and Economy

You can deploy GFS in a variety of configurations to suit your needs for performance, scalability, and

economy. For superior performance and scalability, you can deploy GFS in a cluster that is connected

directly to a SAN. For more economical needs, you can deploy GFS in a cluster that is connected to a

LAN with servers that use the GFS VersaPlex architecture. The VersaPlex architecture allows a GFS

cluster to connect to servers that present block-level storage via an Ethernet LAN. The VersaPlex

architecture is implemented with GNBD (Global Network Block Device), a method of presenting

block-level storage over an Ethernet LAN. GNBD is a software layer that can be run on network

nodes connected to direct-attached storage or storage in a SAN. GNBD exports a block interface from

those nodes to a GFS cluster.

«
...
13
14
15
16
17
...
»

Содержание GFS 5.2.1 -

































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для GFS 5.2.1 -

WJ-ND300 Administrator Console

Бренд: Panasonic Страницы: 27

Бренд: IBM Страницы: 25

Бренд: Navman Страницы: 10

Бренд: YOKOGAWA Страницы: 29

Contivity VPN Client

Бренд: Nortel Страницы: 90

13101332 - Photoshop - Mac

Бренд: Adobe Страницы: 549

Бренд: Alcatel Страницы: 4

SyncMaster S23A750D

Бренд: Samsung Страницы: 90

Sun GlassFish EnterpriseServer v3 Prelude

Бренд: Sun Microsystems Страницы: 48

Sun StorEdge Availability Suite 3.2

Бренд: Sun Microsystems Страницы: 52

Бренд: ESET Страницы: 38

APPLICATION STACK 1.3 RELEASE

Бренд: Red Hat Страницы: 26

CERTIFICATE 7.2 RELEASE NOTES

Бренд: Red Hat Страницы: 24

Бренд: AMX Страницы: 24

Vigil Server V5.00

Бренд: 3xLogic Страницы: 134

Бренд: Yamaha Страницы: 33

MEGASTUDIO PRODUCER AUDIO SOFTWARE

Бренд: PRESONUS Страницы: 3

Бренд: Tascam Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды