Red Hat GFS 5.2.1 - Скачать руководство пользователя страница 107

Страница: 107 / 192

Chapter 9. Managing GFS

9.4.5.3. Examples

This example

disables

quota accounting on file system

/gfs

on a single node.

gfs_tool settune /gfs quota_account 0

This example enables quota accounting on file system

/gfs

on a single node and initializes the quota

file.

gfs_tool settune /gfs quota_account 1

gfs_quota init -f /gfs

9.5. Growing a File System

The

gfs_grow

command is used to expand a GFS file system after the device where the file system

resides has been expanded. Running a

gfs_grow

command on an existing GFS file system fills all

spare space between the current end of the file system and the end of the device with a newly initialized

GFS file system extension. When the fill operation is completed, the resource index for the file system

is updated. All nodes in the cluster can then use the extra storage space that has been added.
The

gfs_grow

command can only be run on a mounted file system, but only needs to be run on one

node in the cluster. All the other nodes sense that the expansion has occurred and automatically start

using the new space.
To verify that the changes were successful, you can use the

gfs_grow

command with the

-T

(test) and

-v

(verbose) flags. Running the command with those flags displays the current state of the mounted

GFS file system.

9.5.1. Usage

gfs_grow

MountPoint

Specifies the GFS file system to which the actions apply.

9.5.2. Comments

Before running the

gfs_grow

command:

•

Back up important data on the file system.

•

Display the pool volume that is used by the file system to be expanded by running a

gfs_tool df

MountPoint

command.

•

Expand the underlying pool volume with a

pool_tool -g command

. Refer to Section 5.8

Grow-

ing a Pool Volume

for additional information.

After running the

gfs_grow

command, run a

command to check that the new space is now avail-

able in the file system.

Содержание GFS 5.2.1 -

































































































































































































Результаты поиска

Содержание GFS 5.2.1 -

Отзывы:

Похожие инструкции для GFS 5.2.1 -

Бренды по названию

Популярные бренды

Red Hat GFS 5.2.1 -, Руководство администратора

Результаты поиска

Содержание GFS 5.2.1 -

Отзывы:

Похожие инструкции для GFS 5.2.1 -

Бренды по названию

Популярные бренды