Red Hat GFS 5.2.1 - Скачать руководство пользователя страница 27

Страница: 27 / 192

Chapter 3.

Installing System Software

Installing system software consists of installing a Linux kernel and the corresponding GFS software

into each node of your GFS cluster. This chapter explains how to install system software and includes

the following sections:

•

Section 3.1

Prerequisite Tasks

•

Section 3.2

Installation Tasks

•

Section 3.2.1

Installing a Linux Kernel

•

Section 3.2.2

Installing A GFS RPM

•

Section 3.2.3

Loading the GFS Kernel Modules

3.1. Prerequisite Tasks

Before installing GFS software, make sure that you have noted the key characteristics of your GFS

configuration (refer to Section 1.5

Before Configuring GFS

). Make sure that you have installed the

following software:

•

Net::Telnet Perl

module

•

Clock synchronization software

•

Stunnel

utility (optional)

3.1.1.

Net::Telnet Perl

Module

The

Net::Telnet Perl

module is used by several fencing agents and should be installed on all

GFS nodes. The

Net::Telnet Perl

module should be installed before installing GFS; otherwise,

GFS will not install.
You can download the

Net::Telnet Perl

module and installation instructions for the module from

the Comprehensive Perl Archive Network (CPAN) website at http://www.cpan.org.

3.1.2. Clock Synchronization Software

Make sure that each GFS node is running clock synchronization software. The system clocks in GFS

nodes need to be within a few minutes of each other for the following reasons:

•

Avoiding unnecessary inode time-stamp updates — If the node clocks are not synchronized, the

inode time stamps will be updated unnecessarily, severely impacting cluster performance. Refer to

Section 9.9

Configuring

atime

Updates

for additional information.

•

Maintaining license validity — If system times are incorrect, the license may be considered invalid.

Содержание GFS 5.2.1 -

































































































































































































Результаты поиска

Содержание GFS 5.2.1 -

Отзывы:

Похожие инструкции для GFS 5.2.1 -

Бренды по названию

Популярные бренды

Red Hat GFS 5.2.1 -, Руководство администратора

Результаты поиска

Содержание GFS 5.2.1 -

Отзывы:

Похожие инструкции для GFS 5.2.1 -

Бренды по названию

Популярные бренды