Red Hat GFS 5.2.1 - Скачать руководство пользователя страница 51

Страница: 51 / 192

Chapter 5. Using the Pool Volume Manager

5.13.2. Examples

This example displays statistics for all activated pools:

pool_info -s

This example displays statistics for

pool0

pool_info -s pool0

This example clears statistics for

pool0

pool_info -c pool0

5.14. Adjusting Pool Volume Multipathing

The

pool_mp

command adjusts multipathing for running pools. Using the

pool_mp

command with

the

-m

option, you can change the type of multipathing. Using the

pool_mp

command with the

-r

option, you can reintegrate failed paths.

Note

Pool multipathing must be enabled in the license file to use this feature.

5.14.1. Usage

Change the Type of Multipathing

pool_mp -m {none | failover |

} [

PoolName

]

{none | failover |

}

Specifies the type of multipathing to be used: either

none

failover

, or the number of kilo-

bytes,

, used as a round-robin stripe value.

PoolName

Specifies the pool on which to adjust multipathing. If no pool names are specified, this action is

attempted on all active pools.

Reintegrate Failed Paths

pool_mp -r [

PoolName

]

PoolName

Specifies the pool on which to attempt restoration of any failed paths. If no pool names are

specified, this action is attempted on all active pools.

Содержание GFS 5.2.1 -

































































































































































































Результаты поиска

Содержание GFS 5.2.1 -

Отзывы:

Похожие инструкции для GFS 5.2.1 -

Бренды по названию

Популярные бренды

Red Hat GFS 5.2.1 -, Руководство администратора

Результаты поиска

Содержание GFS 5.2.1 -

Отзывы:

Похожие инструкции для GFS 5.2.1 -

Бренды по названию

Популярные бренды