Red Hat GFS 5.2.1 - Скачать руководство пользователя страница 140

Страница: 140 / 192

126

Appendix A. Upgrading GFS

A.2. Upgrade Procedure

This procedure is for upgrading from LOCK_DMEP or LOCK_GULM GFS 5.1.x file systems to

GFS 5.2.x LOCK_GULM file systems. It includes command usage, references to other sections of

this book, and examples as necessary.
To upgrade the software follow these steps:

1. Save a copy of the GFS 5.1.x configuration file from the CIDEV.

Note

If using multiple CIDEVs for LOCK_DMEP file systems, save a copy of each.

Command usage:

gfs_conf -p

CIDEVName

cidev.cf

CIDEVName

Specifies the name of the GFS 5.1.x CIDEV device.

2. Halt the cluster nodes and the lock servers. The remaining steps require that the GFS cluster be

stopped (all GFS nodes shut down). Stopping the GFS cluster consists of the following actions:

a. Unmounting GFS file systems from all nodes.
b. Stopping lock servers.
c. Deactivating pools.

d. Unloading kernel modules.

Reference: Chapter 3

Installing System Software

3. Install new software. This step consists of the following actions:

a. Installing kernel RPMs (or compile a new kernel) supported for GFS 5.2.x.
b. Installing GFS 5.2.x RPMs.

4. Install new kernel modules on GFS nodes.

Reference: Chapter 3

Installing System Software

Example:

insmod ccs

insmod pool

insmod lock_harness

insmod lock_gulm

insmod gfs

5. Create CCS files.

The

gfs_conf

command provided with GFS 5.2.x can be used to produce CCS configuration

files from a GFS 5.1.x CIDEV or a GFS 5.1.x configuration file. When upgrading to CCS files,

ClusterName

parameter must be provided on the command line. This will be the name of

the GFS 5.2.x cluster (from 1 to 16 characters long).
The

gfs_conf

command produces a directory named for the cluster containing the new CCS

files. It may be necessary to check those files to make corrections or add missing information.

Refer to Chapter 6

Creating the Cluster Configuration System Files

for information about the

CCS files.

Содержание GFS 5.2.1 -

































































































































































































Результаты поиска

Содержание GFS 5.2.1 -

Отзывы:

Похожие инструкции для GFS 5.2.1 -

Бренды по названию

Популярные бренды

Red Hat GFS 5.2.1 -, Руководство администратора

Результаты поиска

Содержание GFS 5.2.1 -

Отзывы:

Похожие инструкции для GFS 5.2.1 -

Бренды по названию

Популярные бренды