RCT Power Storage DC 10.0, Руководство пользователя

Страница: 112 / 118

107
8.8
Software updates for inverter and battery
We are continuously working on the improvement and development of our products. Product software is updated and
published at irregular intervals. Please use the following procedure to update your device to the latest software version:
Ensure that the "RCT Power App" is up to date. In "Google Play Store" go to "My apps & games" and check under the tab
"Updates" if updates for "RCT Power APP" are available.
Do not close the RCT Power APP during a software update! In case the update fails, try again. Please note that any update
of the inverter software represents a certain risk.
To update the inverter and / or the battery, proceed as follows:
Step Description
1 Launch “RCT Power APP“ and establish connection to the device.
2 Follow Menu path "DEVICE” - → "Settings” - → "Update”.
3 Update the Inverter software under the header "Control Update"
and the battery software under the header "BMS Update".
Latest software version available:
→ actual version XXXX
The software version currently installed on the device:
→ your version XXXX
If the two version numbers match, the system is up to date.
Slaves connected via LAN can automatically receive the latest
software version updated for the master. To enable this go to
"Control Update" and set tick mark for "Activate aut. update
slaves". ( see section 8.5.3.2 for additional information on slave
updates)
4 Before you start with the software update ensure that you have
a sufficient DC power of >100W.
5 To initiate an update press "UPDATE FROM APP".
After you have confirmed the safety questions in the dialogue
boxes the update will start.
Update progress is displayed with a yellow bar.
Check that the update has been completed successfully.
If the update fails, restart the update, even if the connection to
the device is not displayed at the first. Please contact RCT Power
if you are still unable to complete the software update.
The system software is up to date when the message "Update
successfully done" is displayed.
9 Error Messages and Troubleshooting
The inverter displays errors messages on the LCD display and stores them in the internal error memory.