RCH Touch ME, Руководство по установке и обслуживанию

Страница: 8 / 62

DOCUMENTATION RESERVED FOR RCH SERVICE CENTERS.
RCH TOUCH ME
- - 8
2.3 PRINTER DARKNESS
In the SVR mode (5 and [KEY]), repeatedly press the [+%] key to visualize “ Print
intensity” (Printer darkness) .
A)Press [CASH]
B)Insert a number from 1 to 4 depending on the
darkness required for the receipt. Default value is 2.
After inserting the number press [CASH].
The display returns to the main menu; to exit the menu press [Void].
NOTE: a higher darkness value increases the emission time of the receipt; the appropriate
value depends on the sensibility of the thermal paper.
2.4 BATTERY CHECK
This function allows to set the voltage threshold value of the external battery (only for
factory test). If battery voltage goes below a programmed value, after emitting the receipt
the device indicates the problem of insufficient electrical Power Supply on the display.
A)Press [CASH]
B) The OFF value is preset for the TOUCH ME device;
press [%-] and the [CASH] key to enable checking
B) Default value is 10,5 V (recommended by RCH), but
can be manually changed depending on the battery
connected. Press [CASH]
The display returns to the main menu; to exit the menu press [Void].
INTENSITY ( 0 - 4 )?
2
- SERVICE -
Print intensity
CHECK. BATTERY ?
ON / <OFF>
- SERVICE -
Battery Check
WARNING LEVEL ?
10,5