DOCUMENTATION RESERVED FOR RCH SERVICE CENTERS.
RCH TOUCH ME
- -
18
STEP 2: SERIALIZE ECR
Before proceeding with the ECR serialization be sure that:
•
The MMC used before the reset is inserted in the apposite slot next to the serial
port.
To enter in SVR mode:
o
Press 5 and KEY
o
Insert password 555,
o
Confirm
by
CASH
In the
SVR
repeatedly press the
[%+]
key to visualize
“
Serialize ECR”
(Set ECR Serial
number)
.
A) Press [CASH]
B) The ECR serial number is recovered from the MMC
C) press [%-] to change from NEJ to JA and confirm
<JA> by pressing [CASH] key
D) a message will indicate that the Serial Number is
stored into the ECR (ECR SERIAL NUMBER OK)
The display returns to the main menu; to exit the menu press [Void].
NOTE 1:
if the Serial Number has been inserted yet, you’ll visualize the following message
on the clerk display: “ECR ÄNNU EJ SERIALIZED! [CL]”, press [CL] to returns to the main
menu.
NOTE 2
:
if the ECR has been activated yet, you’ll visualize the following message on the
clerk display: “E.J. ÄNNU EJ AKTIVERAD! [CL]”, press [CL] to returns to the main menu.
NOTE 3
:
if you set “S.N. S6 72xxxxxx JA/<NEJ>”, you can set the Serial Number of the
ECR manually. MMC changed is required and go to the Step 3 of the chapter: “
First
Inizialization
”.
S.N. S6 72000001
JA/<NEJ>
- SERVICE -
Serialize ECR
F.M. INITIALIZE
OK
