RCH
INSTALLATION AND MAINTENANCE MANUAL model TOUCH ME
- 34 -
4.4.1 LIST OF KEYS THAT CANNOT BE RE-PROGRAMMED
Each keypad display configuration lets you re-program the functions of certain keys. The
following table lists the keys in the GEST KEY menu that cannot be re-programmed
(SERVICE mode – 6 KEY).
NON-PROGRAMMABLE
KEYS
VIDEO 1 CONF.
VIDEO 2 CONF. VIDEO 3 CONF.
DEPARTMENT keys
X
X
X
PAPER FEED
X X X
SCROLL PAGES
X X X
KEY
X X X
FUNCTIONS
X X X
SUBTOTAL (double key)
X X X
CASH
X X X
SCROLL DEPARTMENTS
X
TOTALS (double keys)
X
4.5 KEYPAD DISPLAY RESET BUTTON
At the rear of the TOUCH ME cash register, under the keypad video, there is a small reset
hole.
Push any pointed implement into this hole to restore the display’s default settings.
The keypad display’s default sittings are
:
•
VIDEO 1 configuration active
•
ITALIAN language
•
Key BEEP enable
•
VIBRATE disabled
•
Default department colours
•
Default key functions
If you press the reset button, the message PLEASE SWITCH OFF-ON appears.
Switch the cash register off and back on again at the switch on the left side near the
keypad display.
IMPORTANT NOTE
: THIS OPERATION ONLY RESTORES THE DEFAULT SETTINGS
OF THE KEYPAD DISPLAY.
To perform a measurement hardware reset, refer to section 6.3.
