RCH
INSTALLATION AND MAINTENANCE MANUAL model TOUCH ME
- 39 -
6. MAINTENANCE
6.1 PROGRAMMING DATE AND TIME
Set the key in the P position – Programming.
Scroll the menu with [%+] until “ DATE/TIME “ appears: confirm selection with the
[CASH] key.
* NW: the
DATE/TIME
(Date / Time) setting function is automatically recalled after each
hardware reset.
The following message is shown on the display:
“DAY: “
“
AB”
where AB is the date memorized in the internal clock
It is possible to accept the proposed date or insert a new one using the keyboard; confirm
by pressing the [CASH] key.
Repeat the same procedure for the MONTH, YEAR (4 digits), HOUR and MINUTES.
If a wrong value is inserted (for example MONTH = 14 or HOUR = 32) an error message is
displayed “DATE ERROR” or “HOUR ERROR”, and reinserting date is required.
6.2 OPENING AND CLOSING THE HOUSING
To open the housing:
1) Remove the MMC (electronic journal support)
2) Remove the fiscal screw and the fastening screws on the bottom
3) Lift the upper part of the housing and let it slide towards the operator.
To close the housing proceed as follows:
1) Hook the front part of the housing onto the base
2) Close the rear part by pressing downwards
3) Complete by fastening the fiscal screw and the screws located on the bottom
4) Insert the MMC (electronic journal).
