DOCUMENTATION RESERVED FOR RCH SERVICE CENTERS.
RCH TOUCH ME
- -
11
2.9 ENABLING THE X,Z,PRG PASSWORD
In SERVICE mode, you can use the X, Z, PRG PASSWORD function to set a numeric
password of up to four digits. You can change the password at any time by returning to the
password function and entering the existing password. If you forget or lose the password,
the only way that the technician changes it in SRV mode.
In
SRV
(5 [KEY] 555 [CASH]) press [%+] repeatedly until
X,Z,PRG PASSWORD
appears.
A) Press the [CASH] key.
B) Press the [%-] key and [CASH] to enable the
password in X, Z, PRG mode (<YES>), or press the
[%+] key and [CASH] key to disable.
C) Enter the new password (up to four digits). The
actual numbers are displayed so that you can check
them. Once you have entered the complete new
password, press CASH.
The display returns to the main menu. Press [VOID] to quit the menu.
NOTE: If the password exceeds three digits, a point (dot) is displayed after every group of
three figures you enter. This character has no influence on the remaining figures in the
password. For example, if you enter the password 1234, as you proceed the display will
read out 1.234. The dots must not be entered when you enter the password.
- SERVICE -
X,Z,PRG PASSWORD
X, Z, PRG PassWORD ?
<YES> / NO
CONFIG PASSWORD:
123
