DOCUMENTATION RESERVED FOR RCH SERVICE CENTERS.
RCH TOUCH ME
- -
21
2.12 LOADING GRAPHICS
In the
SVR
mode (5 and [KEY]), repeatedly press the
[+%]
key to visualize
“
Load logo”
(Loading Graphics
).
With the TOUCH ME device it’s possible to manage:
•
1 programmable STORE LOGO (receipt heading logo)
•
4 standard (present by default) + 1 programmable (receipt end logo) HALO LOGOS
2.12.1 LOGO DIMENSIONS
The STORE LOGO and the HALO LOGO (footer) have the same fixed dimension:
384 x
156
pixels (width x height), which correspond to 7,37 Kb and must be saved in a mono-
chromatic bitmap format
(.bmp)
.
Create your Logos respecting the dimensions and the format indicated. Please avoid using
long horizontal lines for the logos, since they are particularly severe on the type of thermal
printer currently used for the TOUCH ME device. It is advised to use less than 1/3 the dots
available per printing line, which means using black for less than 30% on each single
printing line. If this warning is not respected when printing the logo, the TOUCH ME device
may signal “
E60: PAPER OUT”
(end of paper). In this case, modify the logo by significantly
reducing the amount of black present in the logo.
Example of compliant logos
Example of non-compliant logos
