RCH Touch ME Скачать руководство пользователя

Страница: 22 / 62

RCH

INSTALLATION AND MAINTENANCE MANUAL model TOUCH ME

- 22 -

2.12.2 LOADING THE LOGOS

Once the logos have been created and saved (heading and/or footer) proceed as follows:

- From the RCH website, download the GRLOGO program for loading the logos on

the TOUCH ME device (attached to the TOUCH ME firmware version).

- Connect the cable (TOUCH ME - Pc) between the serial port of the PC and the

serial port 1 of the TOUCH ME device.

- Launch the GRLOGO program (with WIN 2000 or higher O.S.) present in the

PROGRAMMA_CARICO_LOGO

folder; the program window appears.

- Select the COM used for the connection between the PC and the TOUCH ME

device in the lower left box.

- From

the

Work Directory

box,

select the folder that contains

the logo.

- Select the logo (.bmp file) from the

Bitmap Select

box. Note: The

Rom File Select

box is not used.

- After selecting the Logo to insert before the receipt heading (visible in the preview),

checkmark the

TO AREA 1

box.

- Now operate on the TOUCH ME device; in SERVICE mode (5 and [KEY]), with the

LOAD LOGO

function (loading graphics), press [CASH]

- Using the mouse, press the

TRANSMIT

button

within the next ten seconds. A beep

of the TOUCH ME device and a progress bar on the PC’s monitor indicate the
reception of the logo by the cash register.

- From the PC, select the Halo logo (footer) to insert at the end of the receipt (visible

in the preview) and checkmark the

TO AREA 2

box.

- Now operate on the TOUCH ME device; in SERVICE mode (5 and [KEY]), with the

LOAD LOGO

function (loading graphics), press [CASH]

- Using the mouse, press the

TRANSMIT button

within the next ten seconds. A beep

of the TOUCH ME device and a loading bar on the PC’s monitor indicate the
reception of the logo by the cash register.

- The display returns to the main menu; to exit the menu press [Void Receipt/Void].

-- LOAD--

-- GRAPHICS --

-- LOAD--

-- GRAPHICS --

Содержание Touch ME































































Результаты поиска

Содержание Touch ME

Отзывы:

Похожие инструкции для Touch ME

Бренды по названию

Популярные бренды

RCH Touch ME, Руководство по установке и обслуживанию

Результаты поиска

Содержание Touch ME

Отзывы:

Похожие инструкции для Touch ME

Бренды по названию

Популярные бренды