Raytheon Anschütz AP02-S01, Руководство пользователя

Страница: 62 / 166

PILOTSTAR D
2--20
3060.DOC012
Edition: March 13, 2009
2.2.8.2 Track Change
The track change to the next track section of a route is to be initiated via the external
navigation system.

Change to a new track section of the route
Within the next line, the message NEW TRACK appears.
The LED panel of the ”Symbol” key is flashing (RED); an audible message is re-
leased.
On actuating the ”Symbol” key, the
NEW TRACK course preselection is taken over
as a set course preselection for the autopilot. The SET COURSE indication shows
the new track heading.
The LED panel of the ”Symbol” key becomes dark; the audible message ceases.
Dependent on the preselected rate of turn, the ship starts turning into the next
track section.
If the track change manoeuvre cannot be initiated within an adequate time, an ex-
act track control is no longer possible. The ship will continue on the still valid track
course of the former track section, thus leaving the planned route. The audible and
visual signalling remains in existence until a decision is made, i.e.
-- Acknowledgement and, therefore, acceptance of the new track section
data, or
-- Change--over to another operating mode.
2.2.8.3 Approching a Track (Position Receiver with XTE Transmission)
If use is made of a position receiver with XTE transmission, no
track course transmission takes place .
In this case, the track course is to be read off the position
receiver and to be adjusted on the PILOTSTAR D manually via
the rotary knob.
NEW TRACK...
Track
xte meter ’123’
crosstrack distance [m]