Raytheon Anschütz AP02-S01, Руководство пользователя

Страница: 60 / 166

PILOTSTAR D
2--18
3060.DOC012
Edition: March 13, 2009

For taking over the track course data, the symbol key must be actuated for
acknowledging.
The LED panel of the key becomes dark; the system message in the text line
goes out; the audible alarm ceases.
The
SET COURSE indication now shows the track course and will not
change unless a new track is selected. The only exception will be if the
navigation receiver is sending the HSC or XTE telegram sentence.
NOTE
If the track course is not acknowledged within the permissible time,
exact and useful track control is no longer possible. Extreme ma-
noeuvre are to be expected.
In this connection, renewed manual approach of the track is rec-
ommended.
Track control is active; the ship -- dependent on the preset rate of turn (ROT/MIN) (see
Chapter 2.3) -- starts turning into the given track course.
Only use track changes in a range of <180

for safety reasons.
The OFF TR AC K and OFF CRS (off heading) monitoring is not active until the
SET COURSE presetting is reached.

The display indication is as follows
PORT STBD
SET COURSE
OFF TRK
OFF CRS
PARAM
VARI.
LIMITS
YAWING
RUDDER
CNTRUD
SPEED
GYRO
10 20 30
STANDBY
EXT. CRS
Limit adjustment for
OFF TRACK and
OFF COURSE
monitoring
After change--over, the ship is still outside the
monitoring limits. The corresponding area is
flashing.
NEW TRACK 163.5
Rudder angle indicator
Limit adjustment for
rudder limitation