Raymarine A65, Руководство по эксплуатации

Страница: 264 / 390

17.1 Data application overview
The Data application enables you to view data
generated by the multifunction display or data that is
available on your system.
Data can be obtained from devices connected using
SeaTalk
hs , SeaTalk ng or NMEA protocols.
Pre-configured datapages
The default datapage configuration is dependant
upon the boat type selected during the initial set-up
wizard.
Each datapage consists of a number of 'cells', that
display the information.
Default datapage configuration is shown below:
Motor vessel Sailing vessel
Page
number Page Page
number Page
1/6 Engine 1/5 Engine
2/6 Navigation 2/5 Navigation
3/6
Environment
3/5 Sailing
4/6
Fishing
4/5
Environment
5/6
Fuel
5/5
Rolling road
6/6 Rolling road
Note: Datapage selection is a local setting, and
therefore only affects the individual display that
you are currently using. It does not affect any
networked displays.
17.2 Selecting datapages using
touch
You can scroll through all available pages using the
touchscreen.
D12878-1
From the Data application:
1. Touch the screen.
2. Slide your finger up and let go of the screen to
go to the next datapage.
3. Slide your finger down and let go of the screen to
go to the previous datapage.
264
LightHouse multifunction display operation instructions