Raymarine A65, Руководство по эксплуатации

Страница: 153 / 390

It can now be displayed, edited and erased etc.
in the same way as other routes in the system.
3. Select Ok to confirm.
4. Select Edit to change the name and line color of
the created route.
Building a route from a track displayed on the
chart
From the chart application:
1. Select the required track.
The track context menu is displayed.
2. Select Create Route From Track .
On completion, the maximum deviation of the
route from the recorded track is displayed in a
pop up message and the new route is added to
the route list. It can now be displayed, edited
and erased etc. in the same way as other routes
in the system.
3. Select Ok to confirm.
4. Select Edit to change the name and line color of
the created route.
Automatic route generation
Automatic route generation can be used to
automatically create the shortest route between 2
waypoints. Automatic route generation can be used
when creating new routes or when adding a route
leg to an existing route.
The generated route is based on the data available
on compatible cartography compared with user
defined settings. Waypoints automatically generated
will be restricted from entering areas that do not
adhere to the user defined settings.
Important: The following restrictions apply:
• Automatic route generation can only be used
when generating routes within the area covered
by your compatible cartography.
• Automatic route generation can be used
between waypoints less than 100 nm apart.
• Automatic route generation always uses
the cartography’s minimum depth reading
when calculating routes. Please refer to the
Differences between Autorouting and Easy
Routing
section for further details.
• Automatic route generation will fail if the
generated route will exceed the maximum
waypoint or route capacity of the MFD.
• Automatic route generation will also fail if
insufficient cartographic data is available.
Automatic route generation - compatible
cartography
Automatic route generation requires compatible
Navionics ® or C-MAP by Jeppesen cartography.
The Navionics
®
Autorouting feature is available on
the following cartography:
• Navionics ® Updates
• Navionics ® Platinum TM
• Navionics ® Platinum TM +
The C-MAP by Jeppesen Easy Routing feature is
available on the following cartography:
• C-MAP 4D MAX
• C-MAP 4D MAX+
Automatic route generation - user defined
settings
User defined settings must be set before using
automatic route generation. The settings used for
route generation are dependent on cartography
vendor.
User setting
Navionics ®
Autorouting
C-MAP by
Jeppesen
Easy Routing
Minimum Safe
Depth
Minimum Safe
Beam
Minimum Safe
Height
Refer to 3.17 Initial set up procedures for details on
setting the required user defined settings.
Waypoints, Routes and Tracks
153