Rauch AERO GT ISOBUS, Руководство оператора

Страница: 61 / 66

Alarm messages and possible causes
57
6
6 Alarm messages and possible causes
Various alarm messages can be displayed on the ISOBUS terminal display.
6.1 Meaning of alarm messages
Message on display Meaning and possible cause
Externally controlled parts may move. Risk of
injury through squeezing and shearing!
Direct ALL persons out of the danger zone.
Read the instruction manual. Parts may move unexpectedly when the
machine control unit is switched on.

Follow the instructions displayed only if all
possible risks have been eliminated.
Hopper left empty. The fill level sensor reports “empty”.

The left hopper is empty.
Hopper right empty. The right level sensor reports “empty”.

The right hopper is empty.
Oil temp. too high The oil temperature of the blower drive has
reached the set alarm limit and the cooler
does not start.

Is the cooler supplied with electricity?

Check power supply and plug connections
and replace if necessary.
Low oil level! The oil tank level sensor reports “Empty”.

Check oil quantity and top up if necessary.
See the operating manual for your
machine
Check blower RPM
Spreading not possible. Boom not unfolded or
not unlocked.

See 4.7: Fold boom in/out, page 41 .
Forward speed or application rate too high The maximum application rate alarm has been
reached.