Rauch AERO GT ISOBUS, Руководство оператора

Страница: 54 / 66

Operation AERO GT ISOBUS 4
50
4.11.1 Trip counter
In this menu, you can query the values of the spreading work performed, observe
the remaining material available for spreading, and reset the trip counter by
clearing it.

Call up the menu Weighing - Trip count > Trip count .
 The Trip count menu appears.
During the spreading work (with the metering sliders open), you can go to the
Trip count menu and view the current values.
Figure 4.17: Trip counter menu
[1] Display fields for material spread, area covered and distance covered
[2] Delete trip count
Delete trip counter:
1.
Open the sub-menu Weighing - Trip count. > Trip counter .
 The display shows the values recorded for the amount of material spread,
the area covered and the distance covered
since the last time the
counter was cleared .
2. Press the Delete trip counter button.
 All of the trip counter values are reset to 0.
NOTICE
If you wish to continuously observe the values during the spreading work, you
may also assign the user-selectable display fields on the working screen to
kg trip , ha trip or m trip ; see 2.1.2: Display fields, page 7 .
1
2