Rauch AERO GT ISOBUS, Руководство оператора

Страница: 42 / 66

Operation AERO GT ISOBUS 4
38
4.6.3 Forward speed calibration
The speed calibration is the basic requirement for an exact spreading result.
Factors, such as e.g. tyre size, slippage between tyres and ground, ground
characteristics and tyre pressure all influence the speed measurement and
therefore the spreading result.
Preparing the speed calibration:
The exact calculation of the number of speed pulses over 100 m is very important
for the precise spreading of fertiliser.

Conduct the calibration in the field. This reduces the influence of the ground
characteristics on the calibration result.

Determine a 100 m long reference track as precisely as possible.

Fill only half of the machine, if possible.
Calling up the speed settings:
In the AERO GT ISOBUS control unit, you can save up to 4 different profiles
for the type and number of pulses. You can assign names to these profiles
(e.g. tractor name).
Before spreading, check that the correct profile is opened in the control unit.

Call up the Machine settings > Tractor (km/h) menu.
Figure 4.10: Tractor (km/h) menu
[1] Active tractor profile
[2] Number of pulses over 100 m
[3] Profile is created, currently not used
[4] Tractor designation
[5] Empty tractor profile
1
2
4
5
3