Rauch AERO GT ISOBUS, Руководство оператора

Страница: 34 / 66

Operation AERO GT ISOBUS 4
30
6. Press OK .
 The new value is saved in the control unit.
 The display changes to page 3.
 The metering roller now fills the spreading trough and automatically stops
after
15 s .
 The display changes to page 4.
7. Empty the fertiliser collection container and then put it back under the
metering device.
8. Press OK .
 The display changes to page 5.
 The calibration process now runs automatically until the metering unit
switches off automatically after
80 s .
Figure 4.6: Menu calibration test and input window (example)
[1] Number of turns of the metering roller
[2] Time remaining until the end of the calibration test
n
WARNING
Risk of injury during the calibration test
Rotating machine parts and escaping fertiliser can lead to injuries.
 Before starting the calibration test, make sure all require-
ments are met.
 Observe the Calibration test chapter in the operating
manual of the machine.
1
2