RAM 1500 2018 Скачать руководство пользователя страница 309

Страница: 309 / 700

The electronically-controlled transmission provides a pre-

cise shift schedule. The transmission electronics are self-

calibrating; therefore, the first few shifts on a new vehicle

may be somewhat abrupt. This is a normal condition, and

precision shifts will develop within a few hundred miles

(kilometers).
Only shift from DRIVE to PARK or REVERSE when the

accelerator pedal is released and the vehicle is stopped. Be

sure to keep your foot on the brake pedal when shifting

between these gears.
The transmission gear selector has only PARK, REVERSE,

NEUTRAL, and DRIVE shift positions. Manual downshifts

can be made using the Electronic Range Select (ERS) shift

control. Pressing the ERS (-/+) switches (column shift) or

moving the gear selector to the left or right (-/+) (console

shift) while in the DRIVE position will select the highest

available transmission gear, and will display that gear limit

in the instrument cluster as 1, 2, 3, etc. Refer to

⬙

Electronic

Range Select (ERS) Operation

⬙

in this section for further

information. Some models will display both the selected

gear limit, and the actual current gear, while in ERS mode.
Gear Ranges
Do not depress the accelerator pedal when shifting from

PARK or NEUTRAL into another gear range.

NOTE:

After selecting any gear range, wait a moment to

allow the selected gear to engage before accelerating. This

is especially important when the engine is cold.
PARK (P)

This range supplements the parking brake by locking the

transmission. The engine can be started in this range.

Never attempt to use PARK while the vehicle is in motion.

Apply the parking brake when exiting the vehicle in this

range.
When parking on a level surface, you may shift the

transmission into PARK first, and then apply the parking

brake.
When parking on a hill, apply the parking brake before

shifting the transmission to PARK, otherwise the load on

the transmission locking mechanism may make it difficult

to move the gear selector out of PARK. As an added

precaution, turn the front wheels toward the curb on a

downhill grade and away from the curb on an uphill grade.
NOTE:

On four-wheel drive vehicles be sure that the

transfer case is in a drive position.
When exiting the vehicle, always:

•

Apply the parking brake.

STARTING AND OPERATING 307

Содержание 1500 2018





























































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 1500 2018

Отзывы:

Похожие инструкции для 1500 2018

Бренды по названию

Популярные бренды

RAM 1500 2018, Руководство пользователя

Результаты поиска

Содержание 1500 2018

Отзывы:

Похожие инструкции для 1500 2018

Бренды по названию

Популярные бренды