RAM 1500 2018 Скачать руководство пользователя страница 644

Страница: 644 / 700

Setting Name

Selectable Options

Auto Unlock On Exit

NOTE:
When the “Auto Unlock On Exit” feature is selected, all doors will unlock when the vehicle is stopped and the trans-

mission is in the PARK or NEUTRAL position and the driver’s door is opened.

Flash Lights With Lock

NOTE:
When the “Flash Lights With Lock” feature is selected, the front and rear turn signals will flash when the doors are

locked or unlocked with the key fob. This feature may be selected with or without the “Sound Horn With Lock” fea-

ture selected.

Sound Horn With Lock

Off

1st Press

2nd Press

Sound Horn With Remote

Start

1st Press Of Key Fob Un-

locks

Driver Door

All Doors

NOTE:

•

When “1st Press Of Key Fob Unlocks: Driver Door” is selected, only the driver’s door will unlock on the first press

of the key fob unlock button. You must push the key fob unlock button twice to unlock the passenger’s doors.

•

When “All Doors” is selected, all of the doors will unlock on the first push of the key fob unlock button.

642 MULTIMEDIA

Содержание 1500 2018





























































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 1500 2018

Отзывы:

RAM 1500 2018, Руководство пользователя, Страница: 644 / 700

Результаты поиска

Содержание 1500 2018

Отзывы: