RAM 1500 2018 Скачать руководство пользователя страница 220 | Manualshive

Страница: 220 / 700

RAM 1500 2018 Скачать руководство пользователя страница 220

CAUTION!

(Continued)

equipped on your vehicle. Undesirable system op-
eration or sensor damage may result when using
replacement equipment that is not of the same size,
type, and/or style. Aftermarket wheels can cause
sensor damage.

•

Using aftermarket tire sealants may cause the Tire
Pressure Monitoring System (TPMS) sensor to be-
come inoperable. After using an aftermarket tire
sealant it is recommended that you take your vehicle
to an authorized dealership to have your sensor
function checked.

•

After inspecting or adjusting the tire pressure always
reinstall the valve stem cap. This will prevent mois-
ture and dirt from entering the valve stem, which
could damage the TPMS sensor.

NOTE:

•

The TPMS is not intended to replace normal tire care and

maintenance or to provide warning of a tire failure or

condition.

•

The TPMS should not be used as a tire pressure gauge

while adjusting your tire pressure.

•

Driving on a significantly under-inflated tire causes the

tire to overheat and can lead to tire failure. Under-

inflation also reduces fuel efficiency and tire tread life,

and may affect the vehicle’s handling and stopping

ability.

•

The TPMS is not a substitute for proper tire mainte-

nance, and it is the driver’s responsibility to maintain

correct tire pressure using an accurate tire pressure

gauge, even if under-inflation has not reached the level

to trigger illumination of the TPM Telltale Light.

•

Seasonal temperature changes will affect tire pressure,

and the TPMS will monitor the actual tire pressure in the

tire.

Premium System
The Tire Pressure Monitor System (TPMS) uses wireless

technology with wheel rim mounted electronic sensors to

monitor tire pressure levels. Sensors, mounted to each

wheel as part of the valve stem, transmit tire pressure

readings to the receiver module.
NOTE:

It is particularly important for you to check the tire

pressure in all of the tires on your vehicle monthly and to

maintain the proper pressure.

218 SAFETY

«
...
218
219
220
221
222
...
»

Содержание 1500 2018





























































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов