RAM 1500 2018 Скачать руководство пользователя страница 223

Страница: 223 / 700

flash and the tire pressure display screen will be displayed

showing the tire pressure values the correct locations.
Vehicles With Non Matching Full Size Spare Or Compact
Spare

•

The non matching full size spare or compact spare tire

does not have a TPM sensor. Therefore, the TPMS will

not monitor the pressure in the non matching full size

spare or compact spare tire.

•

If you install the non matching full size spare or compact

spare tire in place of a road tire that has a pressure below

the low-pressure warning limit, upon the next ignition

switch cycle, the TPM Telltale Light and a “LOW TIRE”

message will remain ON and a chime will sound. In

addition, the graphic in the instrument cluster will still

display a pressure value in a different color.

•

After driving the vehicle for up to 20 minutes above

15 mph (24 km/h), the TPM Telltale Light will flash on

and off for 75 seconds and then remain on solid. In

addition, the instrument cluster will display a

⬙

SERVICE

TPM SYSTEM

⬙

message for a minimum of five seconds

and then display dashes (- -) in place of the pressure

value.

•

For each subsequent ignition switch cycle, a chime will

sound, the TPM Telltale Light will flash on and off for 75

seconds and then remain on solid, and the instrument

cluster will display a

⬙

SERVICE TPM SYSTEM

⬙

message

for a minimum of five seconds and then display dashes

(- -) in place of the pressure value.

•

Once you repair or replace the original road tire and

reinstall it on the vehicle in place of the non matching

full size spare or compact spare, the TPMS will update

automatically. In addition, the TPM Telltale Light will

turn OFF and the graphic in the instrument cluster will

display a new pressure value instead of dashes (- -), as

long as no tire pressure is below the low-pressure

warning limit in any of the four active road tires. The

vehicle may need to be driven for up to 20 minutes

above 15 mph (24 km/h) in order for the TPMS to

receive this information.

Tire Pressure Information System (TPIS) 3500 Series
Trucks
Your vehicle may be equipped with a Tire Pressure Infor-

mation System (TPIS).
The Tire Pressure Information System (TPIS) uses wireless

technology with wheel rim mounted electronic sensors to

SAFETY

221

Содержание 1500 2018





























































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 1500 2018

Отзывы:

RAM 1500 2018, Руководство пользователя, Страница: 223 / 700

Результаты поиска

Содержание 1500 2018

Отзывы: