RAM 1500 2018 Скачать руководство пользователя страница 236

Страница: 236 / 700

Seat Belts And Pregnant Women

Seat belts must be worn by all occupants including preg-

nant women: the risk of injury in the event of an accident

is reduced for the mother and the unborn child if they are

wearing a seat belt.
Position the lap belt snug and low below the abdomen and

across the strong bones of the hips. Place the shoulder belt

across the chest and away from the neck. Never place the

shoulder belt behind the back or under the arm.

Seat Belt Pretensioner
The front seat belt system is equipped with pretensioning

devices that are designed to remove slack from the seat belt

in the event of a collision. These devices may improve the

performance of the seat belt by removing slack from the

seat belt early in a collision. Pretensioners work for all size

occupants, including those in child restraints.
NOTE:

These devices are not a substitute for proper seat

belt placement by the occupant. The seat belt still must be

worn snugly and positioned properly.
The pretensioners are triggered by the Occupant Restraint

Controller (ORC). Like the air bags, the pretensioners are

single use items. A deployed pretensioner or a deployed air

bag must be replaced immediately.
Energy Management Feature
The front seat belt system is equipped with an Energy

Management feature that may help further reduce the risk

of injury in the event of a collision. The seat belt system has

a retractor assembly that is designed to release webbing in

a controlled manner.

Pregnant Women And Seat Belts

234 SAFETY

Содержание 1500 2018





























































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 1500 2018

Отзывы:

Похожие инструкции для 1500 2018

Бренды по названию

Популярные бренды

RAM 1500 2018, Руководство пользователя

Результаты поиска

Содержание 1500 2018

Отзывы:

Похожие инструкции для 1500 2018

Бренды по названию

Популярные бренды