RAM 1500 2018 Скачать руководство пользователя страница 74

Страница: 74 / 700

Illuminated Vanity Mirror — If Equipped

Illuminated vanity mirrors are located on each sun visor. To

use the mirror, rotate the sun visor down and swing the

mirror cover upward. The lights will turn on automatically.

Closing the mirror cover turns off the light.

“Slide-On-Rod” Features Of Sun Visor — If
Equipped
The sun visor “Slide-On-Rod” feature allows for additional

flexibility in positioning the visor to block out the sun.
To use the “Slide-On-Rod” feature, rotate the sun visor

downward and unclip it. Pull the sun visor along the

“Slide-On-Rod” until the sun visor is in the desired posi-

tion.

Illuminated Vanity Mirror

“Slide-On-Rod” Extender

72 GETTING TO KNOW YOUR VEHICLE

Содержание 1500 2018





























































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 1500 2018

Отзывы:

RAM 1500 2018, Руководство пользователя, Страница: 74 / 700

Результаты поиска

Содержание 1500 2018

Отзывы: