RAM 1500 2018 Скачать руководство пользователя страница 349

Страница: 349 / 700

WARNING!

(Continued)

injury or damage to the system, see your authorized
dealer for service.

Air Suspension Modes

The Air Suspension system has multiple modes to protect

the system in unique situations:
AERO Mode
To improve aerodynamics, the air suspension system has a

feature which will put the vehicle into AERO height

automatically. Refer to “Instrument Cluster Display” in

“Getting To Know Your Instrument Panel” for further

information.
NOTE:

This mode is intended to be enabled with engine

running.
Tire/Jack Mode
To assist with changing a tire, the air suspension system

has a feature which allows the automatic leveling to be

disabled. Refer to “Instrument Cluster Display” in “Get-

ting To Know Your Instrument Panel” or “Uconnect Set-

tings” in “Multimedia” if equipped with a touch screen

radio for further information.

NOTE:

This mode is intended to be enabled with engine

running.
Transport Mode
For towing your vehicle with four wheels off the road, the

air suspension system has a feature which will put the

vehicle into Entry/Exit height and disable the automatic

load leveling system. Refer to “Instrument Cluster Dis-

play” in “Getting To Know Your Instrument Panel” or

“Uconnect Settings” in “Multimedia” if equipped with a

touch screen radio for further information.
NOTE:

This mode is intended to be enabled with engine

running.
Wheel Alignment Mode
Before performing a wheel alignment, this mode must be

enabled. Refer to “Instrument Cluster Display” in “Getting

To Know Your Instrument Panel” or “Uconnect Settings” in

“Multimedia” if equipped with a touch screen radio for

further information.
NOTE:

This mode is intended to be enabled with engine

running.

STARTING AND OPERATING 347

Содержание 1500 2018





























































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 1500 2018

Отзывы:

Похожие инструкции для 1500 2018

Бренды по названию

Популярные бренды

RAM 1500 2018, Руководство пользователя

Результаты поиска

Содержание 1500 2018

Отзывы:

Похожие инструкции для 1500 2018

Бренды по названию

Популярные бренды