RAM 1500 2018 Скачать руководство пользователя страница 113

Страница: 113 / 700

Manual
To open the sunroof, push and hold the switch rearward to

full open. Any release of the switch will stop the move-

ment. The sunroof and sunshade will remain in a partially

opened condition until the sunroof switch is pushed again.

Closing Sunroof

Express
Push the switch forward and release it within one-half

second and the sunroof will close automatically from any

position. The sunroof will close fully and stop automati-

cally. This is called “Express Close”. During Express Close

operation, any other actuation of the switch will stop the

sunroof.
Manual
To close the sunroof, push and hold the switch in the

forward position. Any release of the switch will stop the

movement and the sunroof will remain in a partially closed

condition until the sunroof switch is pushed again.

Wind Buffeting

Wind buffeting can be described as the perception of

pressure on the ears or a helicopter-type sound in the ears.

Your vehicle may exhibit wind buffeting with the windows

down, or the sunroof (if equipped) in certain open or

partially open positions. This is a normal occurrence and

can be minimized. If the buffeting occurs with the rear

windows open, then open the front and rear windows

together to minimize the buffeting. If the buffeting occurs

with the sunroof open, adjust the sunroof opening to

minimize the buffeting or open any window.

Sunshade Operation

The sunshade can be opened manually. However, the

sunshade will open automatically as the sunroof opens.
NOTE:

The sunshade cannot be closed if the sunroof is

open.

Pinch Protect Feature

This feature will detect an obstruction in the closing of the

sunroof during the Express Close operation. If an obstruc-

tion in the path of the sunroof is detected, the sunroof will

automatically retract. Remove the obstruction if this oc-

curs.
NOTE:

If three consecutive sunroof close attempts result in

Pinch Protect reversals, Pinch Protect will disable and the

sunroof must be closed in Manual Mode.

GETTING TO KNOW YOUR VEHICLE 111

Содержание 1500 2018





























































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 1500 2018

Отзывы:

Похожие инструкции для 1500 2018

Бренды по названию

Популярные бренды

RAM 1500 2018, Руководство пользователя

Результаты поиска

Содержание 1500 2018

Отзывы:

Похожие инструкции для 1500 2018

Бренды по названию

Популярные бренды