RAM 1500 2018 Скачать руководство пользователя страница 190

Страница: 190 / 700

NOTE:

•

The charging system is independent from load reduc-

tion. The charging system performs a diagnostic on the

charging system continuously.

•

If the Battery Charge Warning Light is on it may indicate

a problem with the charging system. Refer to “Battery

Charge Warning Light” in “Getting To Know Your

Instrument Panel” for further information.

The electrical loads that may be switched off (if equipped),

and vehicle functions which can be affected by load

reduction:

•

Heated Seat/Vented Seats/Heated Wheel

•

Heated/Cooled Cup Holders — If Equipped

•

Rear Defroster And Heated Mirrors

•

HVAC System

•

115V AC Power Inverter System

•

Audio and Telematics System

Loss of the battery charge may indicate one or more of the

following conditions:

•

The charging system cannot deliver enough electrical

power to the vehicle system because the electrical loads

are larger than the capability of charging system. The

charging system is still functioning properly.

•

Turning on all possible vehicle electrical loads (e.g.

HVAC to max settings, exterior and interior lights,

overloaded power o12V, 115V AC, USB ports)

during certain driving conditions (city driving, towing,

frequent stopping).

•

Installing options like additional lights, upfitter electri-

cal accessories, audio systems, alarms and similar de-

vices.

•

Unusual driving cycles (short trips separated by long

parking periods).

•

The vehicle was parked for an extended period of time

(weeks, months).

•

The battery was recently replaced and was not charged

completely.

•

The battery was discharged by an electrical load left on

when the vehicle was parked.

•

The battery was used for an extended period with the

engine not running to supply radio, lights, chargers,

+12V portable appliances like vacuum cleaners, game

consoles and similar devices.

188 GETTING TO KNOW YOUR INSTRUMENT PANEL

Содержание 1500 2018





























































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 1500 2018

Отзывы:

Похожие инструкции для 1500 2018

Бренды по названию

Популярные бренды

RAM 1500 2018, Руководство пользователя

Результаты поиска

Содержание 1500 2018

Отзывы:

Похожие инструкции для 1500 2018

Бренды по названию

Популярные бренды