RAM 1500 2018 Скачать руководство пользователя страница 430

Страница: 430 / 700

towing conditions change. Changes to towing conditions

include trailer load, vehicle load, road conditions and

weather.
Adjusting GAIN

NOTE:

This should only be performed in a traffic free

environment at speeds of approximately 20–25 mph

(30–40 km/h).
1. Make sure the trailer brakes are in good working

condition, functioning normally and properly adjusted.

See your trailer dealer if necessary.

2. Hook up the trailer and make the electrical connections

according to the trailer manufacturer’s instructions.

3. When a trailer with electric/EOH brakes is plugged in,

the trailer connected message should appear in the

instrument cluster display (if the connection is not

recognized by the ITBM, braking functions will not be

available), the GAIN setting will illuminate and the

correct type of trailer must be selected from the instru-

ment cluster display options.

4. Push the UP or DOWN button on the steering wheel

until “TRAILER TOW” appears on the screen.

5. Push the RIGHT arrow on the steering wheel to enter

“TRAILER TOW”.

6. Push the UP or DOWN buttons until the Trailer Brake

Type appears on the screen.

7. Push the RIGHT arrow and then push the UP or DOWN

buttons until the proper Trailer Brake Type appears on

the screen.

8. In a traffic-free environment, tow the trailer on a dry,

level surface at a speed of 20–25 mph (30–40 km/h) and

squeeze the manual brake control lever completely.

9. If the trailer wheels lockup (indicated by squealing

tires), reduce the GAIN setting; if the trailer wheels turn

freely, increase the GAIN setting.

428 STARTING AND OPERATING

Содержание 1500 2018





























































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание 1500 2018

Отзывы:

RAM 1500 2018, Руководство пользователя, Страница: 430 / 700

Результаты поиска

Содержание 1500 2018

Отзывы: