RAM 1500 2018 Скачать руководство пользователя страница 240 | Manualshive

Страница: 240 / 700

RAM 1500 2018 Скачать руководство пользователя страница 240

Light, either momentarily or continuously. A single chime

will sound to alert you if the light comes on again after

initial startup.
The ORC also includes diagnostics that will illuminate the

instrument panel Air Bag Warning Light if a malfunction is

detected that could affect the air bag system. The diagnos-

tics also record the nature of the malfunction. While the air

bag system is designed to be maintenance free, if any of the

following occurs, have an authorized dealer service the air

bag system immediately.

•

The Air Bag Warning Light does not come on during the

four to eight seconds when the ignition switch is first in

the ON/RUN position.

•

The Air Bag Warning Light remains on after the four to

eight-second interval.

•

The Air Bag Warning Light comes on intermittently or

remains on while driving.

NOTE:

If the speedometer, tachometer, or any engine

related gauges are not working, the Occupant Restraint

Controller (ORC) may also be disabled. In this condition

the air bags may not be ready to inflate for your protection.

Have an authorized dealer service the air bag system

immediately.

WARNING!

Ignoring the Air Bag Warning Light in your instrument
panel could mean you won’t have the air bag system to
protect you in a collision. If the light does not come on
as a bulb check when the ignition is first turned on,
stays on after you start the vehicle, or if it comes on as
you drive, have an authorized dealer service the air bag
system immediately.

Front Air Bags
This vehicle has front air bags and lap/shoulder belts for

both the driver and front passenger. The front air bags are

a supplement to the seat belt restraint systems. The driver

front air bag is mounted in the center of the steering wheel.

The passenger front air bag is mounted in the instrument

panel, above the glove compartment. The words “SRS

AIRBAG” or “AIRBAG” are embossed on the air bag

covers.

238 SAFETY

«
...
238
239
240
241
242
...
»

Содержание 1500 2018





























































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов