Rae ToxiRAE PGM-30, Руководство по эксплуатации и обслуживанию

Страница: 90 / 139

COMPUTER INTERFACE FOR TOXIRAE
5 - 17
5.5.2 Send Configuration to the ToxiRAE
After the ProRAE-Suite software opens the configuration
data file, the user can send the configuration settings to
the ToxiRAE monitor. To send the configuration settings
to the instrument, click
Communication->Send Config
menu item or click the Send toolbar icon (right arrow
with “Send” letters), a message box will appear to remind
the user to connect the instrument to the PC through the
serial port. After making sure that the instrument is
connected to the PC, click the
OK button to start the data
transfer.
After the configuration information is sent successfully, a
message box will appear to indicate that the configuration
sending process is completed. Click the
OK button to
close the message box.
If the communication is not successful, an error message
indicating that there is no response from the instrument
will appear. Check the cable to make sure that the
connectors on both ends of the cable are securely seated
in the sockets, then try to send the configuration again. If
the error message still appears after repeated attempts,
call an authorized service center for help.