PROGRAMMING OF TOXIRAE
4 - 20
4.5.4 Set High Alarm Limit
1. The fourth sub-menu item in Table 4.3 is to set the Hi
Alarm limit.
- Display shows "Hi Alarm" and "0100.0" with the left-
most digit flashing, where "0100.0” is the previously
stored Hi Alarm limit.
2. To modify this limit, starting from the left-most digit,
use the
[Y/+]
or
[N/-]
key to change the digit value and
press the
[MODE]
key momentarily to advance to the
next digit. The flashing digit will move on to next digit
to its right. Repeat this process until all 4 digits of the
new Hi Alarm limit are entered. Press and hold the
[MODE]
key for 1 second to exit data entry mode. If
there is any change to the existing value, the display
shows “Save?” Press the
[Y/+]
key to accept the new
value and exit the alarm setting sub-menu. Press the
[N/-]
key to discard the changes.
3.
To preserve the previously stored Hi Alarm limit, press
and hold the
[MODE]
key for 1 second, the unit will
exit data entry mode and move to the next menu item in
Table 4.1.
Содержание ToxiRAE PGM-30
Страница 16: ...OPERATION OF TOXIRAE 2 3 Figure 2 1 Major Parts of the ToxiRAE Pocket PID Unit...
Страница 33: ...OPERATION OF CHARGING STATION 3 2 Figure 3 1 Single Unit Charging Station...
Страница 134: ...APPENDIX E RAE SYSTEMS APPLICATION NOTES E 2 See Appendix F on how to obtain Application Notes...
