PROGRAMMING OF TOXIRAE
4 - 35
4.9.2 Set Site Number
A four-digit site number is stored with each set of
datalogging information. This site number can be used to
identify different job or site locations during the operation
of the instrument.
1. The second sub-menu item in Table 4.7 is to set site
number. Display shows "Site1001" with the left-most
digit flashing, where "1001" is the current site number.
2. To modify this value, starting from the left-most digit,
use the
[Y/+]
or
[N/-]
key to change the digit value and
press the
[MODE]
key momentarily to advance to the
next digit. The flashing digit will move on to next digit
to its right. Repeat this process until all four digits of
the new site value are entered. Press and hold the
[MODE]
key for 1 second to exit data entry mode. If
there is any change to the existing value, the display
shows "Save?" Press the
[Y/+]
key to accept the new
value and exit the setup sub-menu. Press the
[N/-]
key
to discard the changes.
3.
To preserve the current site number value in the unit,
press
and hold the
[MODE]
key for one second, the
unit will exit data entry mode and move to the next
menu item in Table 4.1.
Содержание ToxiRAE PGM-30
Страница 16: ...OPERATION OF TOXIRAE 2 3 Figure 2 1 Major Parts of the ToxiRAE Pocket PID Unit...
Страница 33: ...OPERATION OF CHARGING STATION 3 2 Figure 3 1 Single Unit Charging Station...
Страница 134: ...APPENDIX E RAE SYSTEMS APPLICATION NOTES E 2 See Appendix F on how to obtain Application Notes...
