RADWAG AS R2, Руководство пользователя

Страница: 91 / 96

- 91 -
Send all implemented commands
Format: PC CR LF
Command: PC CR LF - send all implemented commands
Response: PC_A_”Z,T,S,SI…”
- command carried out, the terminal displays all
implemented commands.
Give balance type
Format: BN CR LF
Response options:
BN_A_”x” CR LF
- command understood, response: balance type
BN_I CR LF - command understood but not accessible at this moment
x – series of types for a particular balance (in between inverted commas), with general balance type
in front
An example:
Command: BN CR LF – return balance type
Response: BN_A_”AS” – balance type: ”AS R”
Give max capacity
Format: FS CR LF
Response options:
FS_A_”x” CR LF
- command understood, response: Max capacity
FS_I CR LF - command understood but not accessible at this moment
x – Max value of reading units (in between inverted commas)
An example:
Command: FS CR LF – return Max capacity
Response: FS_A_”220.0000” – Max capacity: ”220 g”
Give program version
Format: RV CR LF
Response options:
RV_A_”x” CR LF
- command understood, response: program version
RV_I CR LF - command understood but not accessible at this moment
x – program version (in between inverted commas)
An example:
Command: RV CR LF – return program version
Response: RV_A_” 1.1.1” – program version: ”1.1.1”
Set AUTOZERO function
Format: A_n CR LF
Response options:
A_OK CR LF
– command carried out
A_E CR LF – error in-course of command execution, no parameter or incorrect format
A_I CR LF – command understood but not accessible at this moment
n – parameter, decimal value determining autozero settings
n →
0 – autozero off
1 – autozero on
CAUTION!
Command changes settings for a current working mode.
An example:
Command: A_1 CR LF – turn autozero function on
Response: A_OK CR LF – autozero function is on
AUTOZERO function operates until it is turned off by A 0 command.