RADICAL DELTA CEP A, Руководство пользователя

Страница: 58 / 63

The following figure shows the behavior of the high-pass filter. Low frequencies are in the
stopband and high frequencies are allowed through.
The band pass filter allows frequencies near the cutoff frequency through, but above and
below this range, all frequencies are suppressed.
13.2 Interpolation
Do you still remember the school time? Have you ever written measurement results into a
table in physics or mathematics lessons and then entered them into a graph? Then your
teacher asked you to connect the points of the measurement series in the graph. Since no
further measured values are to be found in their table between point A and B, it is now
necessary for their drawing skills to plot the assumed intermediate values between two
points with a curve in the graph. This is exactly what the interpolator in the CEP A Delta
does. Its measurement points are its snapshots in this case. For each of the parameters
that have changed between the snapshots, the DELTA CEP A calculates the necessary
intermediate values to produce a smooth sound transition and no sudden changes. This
procedure is called interpolation.
von 58 63
Gain
Passband Stopband
CUTOFF
RESONANCE
FREQUENCY
highpass filter