RADICAL DELTA CEP A, Руководство пользователя

Страница: 24 / 63

3.3 Mixer section
In the Mixer section you can adjust the levels of the different sound sources to be send to
the filter section. Sound sources include external signals, a noise source and the output of
the Swarm oscillator. Why are there three sound sources but only two controls? Noise and
the external signal can only be used alternatively. As soon as you feed a sound source into
the external input with a cable, the noise in the mixer is muted. (Do not panic - At the noise
output, the noise source can be picked independently).
Buttons and knobs of the Mixer section.
Button Knob Description
- - -
EXT/NOISE This adjusts the level of an external signal or noise source.
When feeding in external signals, make sure that the input is
not overdriven. The LED above the EXT IN input should not be
solid red.
SHIFT GLIDE Use the [SHIFT] key to access the glide function of the
oscillator with the EXT/NOISE knob. Glide creates sliding
pitches between two notes, and the slider lets you adjust the
speed of that slide. The behavior of the glide is also
dependent on the selected trigger and note priority setting!
- - - OSC Here you set the level of the Swarm oscillator. In the blue
colored area, the input circuit of the filter goes into saturation,
by which further sound variations of the oscillator waveforms
can be set.
Buttons and knobs of the Mixer section.
Button
von 24 63
SCALE SEL.
GLIDE
MOD EXT IN
OSC
EXT/NOISE
MIXER
6 4
3 7
2
8
9
10
0
1
5