RADICAL DELTA CEP A, Руководство пользователя, Страница: 32 / 63

3.7.1 Tape Delay
Knobs of the FX section after selecting the Tape Delay mode.
Button Knob/Button Description
SHIFT FX-SELECT Hold the [SHIFT] button and select the tape delay algorithm
with the FX SELECT knob. Make sure that LED 1 on the left
side lights up while dialing.
- - - TIME Here you set the echo time.
- - -
FEEDBACK
Here you set the number of echo repeats.
- - -
DRY/WET This knob adjusts the Dry/Wet ratio of the output signal.
SHIFT MOD-RATE At the tape delay algorithm you have the possibility to filter the
echo signal. Hold down the [SHIFT] key and set the MOD
RATE knob to the center to set the filter to neutral. Clockwise,
the controller works as a highpass filter and counterclockwise
as a lowpass filter.
SHIFT MOD-DEPTH While holding down the [SHIFT] key, use the MOD DEPTH
knob to adjust the amount of jitter in the tape delay.
von 32 63
TIME
FEEDBACK
DRY/WET
FX-SELECT
MOD-DEPTH
MOD-RATE
FX
6 4
3 7
2 8
9
10
0
1
5
6 4
3
7
2 8
9
10
0
1
5