RADICAL DELTA CEP A, Руководство пользователя

Страница: 34 / 63

3.7.4 Phaser
3.7.5 Flanger
Knobs of the FX section after selecting the Phaser mode.
Button Knob/Button Description
SHIFT FX-SELECT Hold the [SHIFT] button and select the phaser algorithm with
the FX Select knob. Make sure that LED 4 on the left side
lights up while dialing the algorithm.
- - - TIME The phaser generates its e ff ect by simultaneous phase
cancellations in several frequencies, which are cyclically
shifted thru the frequency spectrum. With the Time knob you
can set up to what maximum frequency the cancellations are
shifted.
- - - FEEDBACK Here you set the lowest frequency to which the phase
cancellations are to be shifted.
- - - DRY/WET This knob adjusts the Dry/Wet ratio of the output signal.
SHIFT
MOD RATE
By pressing [SHIFT] & MOD RATE you can control the speed
of the phaser modulation.
SHIFT
MOD DEPTH
- - -
Knobs of the FX section after selecting the Flanger mode.
Button Knob/Button Description
SHIFT
FX-SELECT Hold the [SHIFT] button and select the flanger algorithm with
the FX Select knob. Make sure that LED 5 on the left side
lights up while dialing the algorithm.
- - -
TIME Here you set the delay time of the flanger e ff ect.
- - - FEEDBACK Here you set the flanger feedback of the e ff ect.
- - -
DRY/WET
This knob adjusts the Dry/Wet ratio of the output signal.
SHIFT
MOD RATE At the flanger algorithm you can adjust the speed of the
flanger modulation by holding [SHIFT] and adjusting the speed
with the MOD RATE knob.
SHIFT
MOD DEPTH Set the modulation depth for the flanger with [SHIFT] & MOD
DEPTH.
von 34 63