RADICAL DELTA CEP A, Руководство пользователя

Страница: 39 / 63

Applications: Wave-Sequencing, rhythmic timbre changes.
But the interpolator can do more. You can vary the mode by instructing the interpolator to
send a trigger to the ADSR when a snapshot is reached, so that a note is played at each
step:
Applications: Sequences, Rhythms.
Switching on the tempo clock.
Button Knob/Button Description
SHIFT TEMPO Hold down the [SHIFT] button and tap the [TEMPO] button. If
the tempo LED flashes yellow, the MORH-LFO is stopped, it is
green, it is running. So you can always switch between
running and stopped.
TEMPO - - - Tap the tempo on the [TEMPO] button. To the right of the
tempo button you will see an LED that flashes according to
the detected tempo.
TEMPO BIG KNOB Hold down the [TEMPO] key and use the Big Knob to select a
value between 1 and 8 in the LED string. Now the cruise
control is running and you are listening to a sequence of your
snapshots! The higher the value, the faster the sequence.
No.
note value
The following note values are o ff ered in the selection:
1
2/1
Tip: When selecting No. 6, the speed of tapping the [TEMPO]-
button is the current clock (quarter-note selection).
2
1/1
3 3/4
4
1/2
5
1/3
6
1/4
7
1/8
8
1/16
Setting up a snapshot-trigger
Button Knob/Button Description
SHIFT
ADSR-GATE
Morph menu function: While holding down the [SHIFT] button,
tap the [ADSR-GATE] key. Now the envelope is triggered at
each snapshot change over. You can press the key
combination several times to select di
ff erent gate times. After
four settings, the gate trigger is switched o ff again. If it's just
about switching o ff , the shortcut in the following row is handy.
- - -
ADSR GATE
Press the [ADSR-GATE] button to turn the snapshot trigger o ff
again.
von 39 63