RADICAL DELTA CEP A, Руководство пользователя

Страница: 19 / 63

- - -
WAVE You can use the [WAVE] button to select the waveform of the
LFO.
- - -
WAVE In 'Patch Select' mode, you can use the [WAVE] button to
access the 5 memory banks. The LEDs of the LFO Wave
Selection will light up according the bank number 1-5. See
chapter 4. "Programs and Snapshots".
Knobs and buttons of the LFO-Section.
Knob/Button Description
Knobs and buttons of the LFO-Section.
Button
In- and output jacks of the LFO-Section.
Jack Input/Output Description
SPEED
Input An applied control voltage controls the speed of the LFO.
SYNC
Input A clock signal on this input allows the LFO to get
synchronized to an external clock source. In the case of an
external clock input, the Speed knob works as a clock divider
for the LFO speed as soon you hold down the [SHIFT] key
while adjusting.
DEPTH
Input With a control voltage applied to this input, you can control
the voltage swing of the LFO wave. Higher voltages increase
the modulation depth.
OUT
Output The periodic modulation voltage can be taken from this
output. Connect the output of the LFO to a modulation inputs
of other sections or external modules to learn more about the
impact of the LFO on modulation targets.
von 19 63