RACOM Midge MG102, Руководство по эксплуатации

Страница: 16 / 122

2.2.3. Installation of the GPS Antenna
MG102 require passive GPS antennas. The router needs to put the antenna with a good view of
satellites.
2.2.4. Installation of the Local Area Network
Up to four Ethernet devices can directly be connected to the MG102, maximal two to M!DGE.
2.2.5. Installation of the Power Supply
MG102 can be powered with the included power supply or another external source supplying between
9 and 32 Volts DC (10–55 Volts DC M!DGE). M!DGE/MG102 is for use with certified (CSA or equivalent)
power supply, which must have a limited and SELV circuit output.
2.3. GPRS/EDGE/UMTS router assembly
Routers M!DGE/MG102 are special devices which require skilled assembly. For subsequent maintenance
RACOM specially trains the user’s skilled staff and as an additional aid provides them with Operating
regulations for radio data networks and Firmware – Documentation. Only the manufacturer, RACOM
s.r.o. Mírová 1283, 592 31 Nové Město na Moravě, Czech Republic, Tel.: +420 565659511, is entitled
to repair any devices.
Important
CAUTION! Danger of explosion upon replacing the incorrect type of battery. Follow the
manufacturers instructions for handling used batteries.
MG102, M!DGE, GPRS/EDGE/UMTS routers – © RACOM s.r.o. 16
Installation