Configure the router.
1.
Connect your device to the router (wired or wireless).
Wired:
Turn off the Wi-Fi on your computer and connect it to the router via
an Ethernet cable.
Wireless:
a.
Find the product label at the bottom of
the router.
b.
Use the default SSID (network name) and
wireless password to join the network.
Tip:
If you are using a smartphone or tablet,
you can also scan the QR code to join the
preset network directly.
Router Mode
1.
B
. Make sure that the
adjustable elbow is
facing up when
attached.
A
. Insert and screw the antenna
into the antenna socket.
2.
Slide the cap onto the antenna
until it fixes into place.
3.
Position the antenna
vertically for best Wi-Fi
performance.
Please note that the router provides three working modes:
Router, Repeater and Access Point. You can choose the
mode to better suit your network needs and follow the
guide to complete the configuration.
3.
Go to
Quick Setup
and follow the step-by-step instructions to
complete the setup.
2.
Launch a web browser, and enter
http://tplinkwifi.net
or
http://192.168.0.1
in the address bar. Create a password to log in.
Install the Antennas
Quick Installation Guide
High Power Wireless N Router
Note:
Images may differ from actual products.
Unplug your modem
, and remove
the backup battery if it has one.
Power on the modem and wait
about
2 minutes
for it to restart.
Modem
This mode enables multiple users to share internet connection via an ADSL/Cable Modem.
If your internet comes from an Ethernet outlet, connect the router’s
Internet port
to it, then skip Step 1, 2 and 3.
3
1
Connect the
power-off
modem to the
router’s
Internet port
via an Ethernet cable.
2
6
Verify that the following LEDs are solid on to
confirm the hardware is connected correctly.
5
Wi-Fi
ON
PWR
ON
WAN
ON
Connect the power adapter to the router
and turn on the router.
4
Wireless Password/PIN:
XXXXXXXX
SSID:TP-Link_XXXX
QR
Code
Important
