3. Configuration
M!DGE/MG102 holds different configurations, such as the factory configuration and the user configur-
ation. The user configuration can be modified by the user as follows:
•
Using the forms on the web pages of Web Manager (chapter Section 3.1, “Configuration via the
M!DGE/MG102 Web Manager”)
•
Upload a new configuration file using the Web Manager (chapter Chapter 3,
)
•
Using the M!DGE/MG102 Command Line Interface (chapter Section 3.3, “Configuration via Command
Line Interface (CLI)”)
•
M!DGE can be configured via a USB stick with a prepared configuration file.
If you are new to M!DGE/MG102 we recommend configuring it using the M!DGE/MG102 Web Manager.
3.1. Configuration via the M!DGE/MG102 Web Manager
The M!DGE/MG102 Web Manager can always be reached via the Ethernet interface. After the successful
setup the Web Manager can also be accessed via the mobile interface. Any up to date web browser
may be used. Any web browser supporting JavaScript may be used. By default the IP address of the
Ethernet interface is 192.168.1.1, the web server runs on port 80.
3.1.1. Initial Access to the Web Manager and Password Definition
The minimum configuration steps usually include:
1.
defining the admin password
2.
entering the PIN code for the SIM card
3.
configuring the Access Point Name (APN)
4.
start the mobile connection
17
© RACOM s.r.o. – MG102, M!DGE, GPRS/EDGE/UMTS routers
Configuration
Содержание Midge MG102
