1.3.2. The Back Panel
The back panel has the interfaces described in the table below:
Fig. 1.4: The Back Panel of 2009 model
Fig. 1.5: The Back Panel of 2010 model
Tab. 1.5: Components on the back panel
Function
State
Color
Label
Panel
GPS antenna connector
Impedance: 50 Ω
Connector: SMA female
MG102-xGx support passive GPS antennas only
–
–
GPS Antenna
(MG102-xGx only)
Back
UMTS / GSM antenna connector
Impedance: 50 Ω
Connector: SMA female
–
–
UMTS / GSM
Antenna
Back
WLAN antenna connector
Impedance: 50 Ω
Connector: SMA female
–
–
WLAN
Antenna
Back
Sub-D 9 (model 2009) or RJ45 port (model 2010)
RS232 (default) or RS485 (configurable)
–
–
COM
Back
4 Ethernet ports – 4port Eth switch / 4 LANs/1WAN+3LANs
according to setting
The default IP address is set to
192.168.1.1.
–
–
Ethernet Ports
Back
Voltage feed connector (9–32 VDC)
–
–
Power
Back
Physical link
on
green
Link/Activity
(Ethernet Ports)
Back
No physical link
off
Data transmission
flashing
Data rate 100 MBit/s
on
green
Speed 10/100
(Ethernet Ports)
Back
Data rate 10 MBit/s
off
MG102, M!DGE, GPRS/EDGE/UMTS routers – © RACOM s.r.o.
12
Product description
Содержание Midge MG102
